This high-grade brass stock sheet, engineered for lubricating applications, offers exceptional wear resistance and self-lubricating properties. Its precise dimensions and material composition ensure optimal performance in demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.534" |
| Length | 30" |
| Width | 37" |
Specified by design engineers worldwide, this brass stock sheet in a 0.534" thickness, 30" width, and 37" length is manufactured to exacting tolerances. Its inherent lubricity and excellent machinability make it ideal for bearing surfaces, bushings, and wear plates where reduced friction and extended component life are critical. The alloy's superior corrosion resistance further enhances its suitability for diverse industrial settings, ensuring reliability and performance under rigorous operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from contaminants. 2. Precisely cut or machine the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to the intended application, verifying proper alignment and fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Utilize specifically formulated lubricating brass grades to ensure adequate wear resistance and reduced friction. |
| Improper machining leading to burrs or surface damage. | Employ sharp cutting tools and appropriate feed rates when machining to maintain surface integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings and sleeve bearings, Wear plates and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||