This high-quality brass stock sheet, specifically designed for lubricating applications, offers exceptional wear resistance and low friction. Its robust construction ensures long-term performance in demanding industrial settings, making it a reliable choice for critical components.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.532" |
| Length | 31" |
| Width | 21" |
A proven choice for industrial professionals, this brass stock sheet boasts a precise thickness of 0.532 inches, with dimensions of 31 inches in length and 21 inches in width. The inherent lubricity of brass, combined with its excellent machinability and corrosion resistance, makes it ideal for components requiring reduced friction and extended operational life. This material's ability to withstand moderate loads and operating temperatures without significant wear makes it suitable for bushings, bearings, and sliding mechanisms where consistent lubrication is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions for the component. 3. Securely fasten the fabricated brass component using appropriate industrial fasteners, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of the mating surface leading to premature wear. | Thoroughly degrease and clean all mating surfaces before installation to ensure optimal frictional performance. |
| Over-tightening fasteners, causing deformation of the brass component. | Apply torque to fasteners according to manufacturer specifications to avoid stressing the brass material. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearing surfaces, Wear plates and guides, Self-lubricating components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||