This industrial-grade brass stock sheet offers superior machinability and excellent corrosion resistance. Its precise dimensions make it ideal for demanding fabrication and component manufacturing.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.531" |
| Length | 44" |
| Width | 36" |
Specified by design engineers worldwide, this brass stock sheet is manufactured to exacting standards for critical applications. Measuring a substantial 0.531 inches (13.5mm) in thickness, with a generous 44 inches (1118mm) length and 36 inches (914mm) width, it provides ample material for complex projects. Composed of a high-purity brass alloy, it exhibits excellent thermal and electrical conductivity, robust strength, and a high resistance to dezincification and stress corrosion cracking, making it a preferred choice for valve components, heat exchangers, and decorative metalwork.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly supported on a stable, flat surface. 2. Utilize appropriate cutting tools such as abrasive saws, band saws, or waterjet cutters. 3. Carefully measure and mark cut lines prior to material removal to maintain dimensional accuracy.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting blades, leading to rough edges and material waste. | Employ sharp, high-quality blades specifically designed for cutting brass for clean, precise cuts. |
| Insufficient clamping of the sheet during cutting, causing vibration and inaccurate cuts. | Securely clamp the brass sheet to the cutting surface using appropriate vises or clamps to prevent movement. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Machined components and fittings, Electrical connectors and contacts, Heat exchanger plates and tubes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||