This premium brass stock sheet is engineered for demanding lubricating applications. Its precise dimensions and inherent material properties make it ideal for reducing friction and wear in critical mechanical systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.529" |
| Length | 19" |
| Width | 25" |
Engineered for reliability and performance, this brass stock sheet boasts a precise thickness of 0.529 inches, a length of 19 inches, and a width of 25 inches. Composed of a high-quality brass alloy, it exhibits excellent inherent lubricity and a low coefficient of friction, making it exceptionally well-suited for applications requiring self-lubricating properties or as a wear-resistant bearing surface. Its machinability allows for custom fabrication of components such as bushings, sleeves, and slide plates, contributing to extended operational life and reduced maintenance requirements in industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove all contaminants. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or premature wear. | Ensure both the brass sheet and the mounting surface are meticulously cleaned and degreased before installation. |
| Over-tightening fasteners, which can warp or deform the brass sheet. | Use torque wrenches to tighten fasteners to the manufacturer's recommended specifications, applying even pressure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings and bearings, Wear strips and guide rails, Slide plates in machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||