This premium, 0.526-inch thick polycarbonate stock sheet offers inherent lubricity, making it ideal for applications demanding low friction and excellent wear resistance. Precision manufactured for consistent performance.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.526" |
| Length | 35" |
| Width | 15" |
Specified by design engineers worldwide, this polycarbonate stock sheet (0.526" thickness, 35" length, 15" width) leverages the material's inherent self-lubricating properties. Its exceptional impact strength, dimensional stability, and chemical resistance make it a robust choice for demanding industrial environments. Applications benefit from its low coefficient of friction, reducing wear and extending component lifespan in sliding or rotating mechanisms. The optical clarity allows for visual monitoring in certain setups.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Carefully position the polycarbonate sheet, aligning it with mounting points or intended application. 3. Secure using appropriate fasteners or adhesives, ensuring even pressure distribution to avoid stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing localized stress and potential cracking. | Use washers and tighten fasteners incrementally to a manufacturer-recommended torque specification. |
| Exposing the sheet to excessive UV radiation without proper protection, leading to degradation. | Utilize UV-resistant coatings or select a UV-stabilized grade if prolonged outdoor exposure is anticipated. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction sliding components, Wear strips and guides, Conveyor system components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||