This high-performance brass stock sheet is engineered for superior lubrication. Its precise dimensions and material composition ensure optimal performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.526" |
| Length | 38" |
| Width | 45" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.526 inches thick, 38 inches in length, and 45 inches in width. Composed of a specific brass alloy optimized for low friction and wear resistance, it exhibits excellent machinability and corrosion resistance. This material is ideal for manufacturing components requiring self-lubricating properties or to act as a bearing surface in machinery and equipment where reduced friction is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of contaminants. 2. Accurately cut the brass sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component in its designated location, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy instead of a lubricating grade. | Specify and procure a brass alloy specifically designed for lubricating applications to ensure proper wear and friction characteristics. |
| Inadequate surface preparation before installation. | Thoroughly clean all mating surfaces to remove any debris or oils that could impede lubrication or cause premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guide rails, Bushings and thrust washers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||