This high-performance lubricating brass stock sheet offers exceptional wear resistance and low friction properties. Precisely manufactured to 0.521-inch thickness, it's ideal for demanding applications requiring smooth operation and longevity.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.521" |
| Length | 15" |
| Width | 16" |
Built to exacting engineering tolerances, this 0.521" thick brass stock sheet measures 15" in length and 16" in width. Composed of a specialized brass alloy optimized for low friction and self-lubricating characteristics, it exhibits excellent machinability and inherent corrosion resistance. The controlled grain structure ensures consistent performance under sliding wear conditions, making it suitable for bushings, bearings, guides, and other components where reduced friction and extended service life are critical. This material's thermal conductivity also aids in heat dissipation during operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free of debris. 2. Carefully cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the prepared brass component to its intended application, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Always specify lubricating grade brass for components requiring low friction and self-lubricating properties. |
| Inadequate surface preparation of mating components. | Thoroughly clean and inspect mating surfaces to prevent premature wear and ensure optimal performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings and bearings, Wear strips and guide components, Low-friction sliding surfaces in machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||