This 0.514" thick 316 stainless steel stock sheet, measuring 23"x30", is specifically engineered for lubricating applications. Its superior corrosion resistance and formability make it ideal for components exposed to harsh environments and wear.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.514" |
| Length | 23" |
| Width | 30" |
Engineered for reliability and performance, this 0.514" thick 316 stainless steel stock sheet is manufactured to stringent tolerances for consistent dimensional accuracy, with a length of 23" and a width of 30". The inherent properties of 316 stainless steel, including its enhanced molybdenum content, provide exceptional resistance to pitting and crevice corrosion, making it the material of choice for components subjected to aggressive chemicals, saltwater, and high-temperature environments commonly found in lubricating systems. Its excellent machinability and weldability facilitate its integration into complex assemblies and custom fabrications for critical industrial and marine applications requiring low friction and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project specifications. 2. Clean the sheet surface thoroughly to remove any debris or contaminants. 3. Fabricate components according to design requirements, ensuring proper edge finishing and deburring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel not suitable for corrosive environments. | Always confirm the material grade is 316 for applications requiring enhanced corrosion resistance. |
| Improper handling leading to surface scratches or contamination. | Handle the sheet with clean gloves and store it on a protected surface to maintain material integrity. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom bearing components, Wear plates in slide mechanisms, Shaft sleeves in fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||