This lubricating grade polycarbonate stock sheet offers superior wear resistance and reduced friction. Its robust mechanical properties make it an excellent choice for high-performance components in demanding environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.510" |
| Length | 20" |
| Width | 24" |
Built to exacting engineering tolerances, this 0.510-inch thick polycarbonate stock sheet (20" x 24") is formulated with integrated lubricants to minimize friction and enhance wear performance. Its high impact strength, excellent dimensional stability, and inherent lubricity make it suitable for applications such as bearings, bushings, gears, and slide components where reduced maintenance and extended service life are critical. The material exhibits good chemical resistance and can operate within a moderate temperature range.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely machine the polycarbonate sheet to the required dimensions using appropriate tooling. 3. Secure the component, ensuring even distribution of load and avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate where lubrication is critical. | Select this specialized lubricating grade polycarbonate for applications requiring reduced friction and wear. |
| Improper machining leading to excessive heat generation. | Utilize sharp tooling and appropriate cutting speeds/feeds to minimize heat build-up during fabrication. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction bearings and bushings, Wear strips and guides, Gears and sprockets in lightly loaded systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||