This premium brass stock sheet is specifically designed for lubricating applications. Its material composition and precise dimensions ensure optimal performance in reducing friction and wear, making it ideal for demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.502" |
| Length | 32" |
| Width | 34" |
Built to exacting engineering tolerances, this 0.502" thick brass stock sheet measures 32" in length and 34" in width. Composed of a high-quality brass alloy, it exhibits excellent inherent lubricity, corrosion resistance, and formability. This material's low coefficient of friction minimizes wear on mating components, making it suitable for bearings, bushings, sliding mechanisms, and wear plates in machinery and equipment where reduced friction is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Cut the brass stock sheet to the required dimensions using appropriate metal cutting tools. 3. Securely fasten the brass component to the intended application, ensuring proper alignment and contact with the mating surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass without considering specific lubricating needs. | Select a brass alloy specifically formulated for its lubricating properties and low friction coefficient for critical applications. |
| Improper surface preparation leading to increased friction. | Thoroughly clean and deburr all mating surfaces before installation to ensure smooth operation and prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Wear plates, Sliding mechanisms, Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||