Engineered for robust performance, this 0.500" thick Nylon stock sheet provides exceptional strength, wear resistance, and impact toughness for critical pneumatic applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.500" |
| Length | 43" |
| Width | 34" |
Purpose-built for heavy-duty applications, this Nylon stock sheet features a substantial 0.500" thickness, ensuring high load-bearing capacity and resistance to deformation under pressure. Its generous dimensions of 43" in length and 34" in width allow for the fabrication of large, durable components. Nylon's inherent properties of excellent abrasion resistance, low coefficient of friction, and superior impact strength make it the material of choice for seals, bearings, and custom-machined parts within demanding pneumatic environments. This material offers a reliable solution for extended service life in high-stress operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate machining tools. 2. Deburr all edges to ensure smooth surfaces and prevent premature wear. 3. Install the fabricated Nylon components according to specific system design and engineering best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers, leading to melting or chipping. | Employ specialized cutting tools with appropriate geometries and cooling methods for machining Nylon to achieve clean cuts. |
| Over-tightening fasteners, which can cause stress concentration and premature failure in Nylon components. | Utilize torque-controlled fastening techniques and consider larger bearing surfaces for fasteners to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic cylinder components, High-wear seals and bushings, Impact-resistant machine guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||