This premium brass stock sheet is engineered for demanding lubricating applications. Its precise dimensions and inherent material properties ensure optimal performance in sliding and bearing surfaces, minimizing friction and wear.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.499" |
| Length | 42" |
| Width | 24" |
Trusted by engineers across multiple sectors, this brass stock sheet boasts a substantial 0.499-inch thickness, providing robust structural integrity. Crafted from high-grade brass, it offers excellent machinability, inherent lubricity, and superior corrosion resistance, making it ideal for components subjected to continuous motion and friction. Its 42-inch length and 24-inch width allow for efficient fabrication of larger parts and numerous smaller components, ensuring consistent performance in bearing surfaces, bushings, and wear plates where controlled friction is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely machine the brass sheet to the required component dimensions. 3. Install the fabricated component, verifying proper fit and lubrication application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-quality brass for critical wear components. | Always select brass stock sheet with verified material composition and sufficient thickness to withstand expected loads and wear. |
| Inadequate surface preparation of mating components. | Thoroughly clean and deburr all surfaces that will come into contact with the brass component to prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings, Wear plates, Sliding components in machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||