This high-performance lubricating grade Nylon stock sheet offers exceptional wear resistance and a low coefficient of friction. Its robust properties make it ideal for components requiring sustained, low-maintenance operation in challenging industrial settings.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.497" |
| Length | 20" |
| Width | 21" |
Designed for demanding industrial environments, this Nylon stock sheet boasts a precise thickness of 0.497 inches, a length of 20 inches, and a width of 21 inches. Engineered with inherent lubricity and excellent mechanical strength, it exhibits superior abrasion resistance, self-lubricating properties, and a high load-bearing capacity. This material is well-suited for applications where reduced friction and extended service life are critical, minimizing the need for external lubrication and mitigating wear on mating surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the component, ensuring even distribution of load and preventing any localized stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting techniques leading to material stress or delamination. | Utilize sharp, carbide-tipped cutting tools designed for plastics and maintain consistent feed rates to prevent overheating and stress. |
| Over-tightening fasteners, causing localized stress concentrations and potential cracking. | Employ torque-limiting tools and ensure adequate washer surface area to distribute pressure evenly across the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guide rails, Bushings and bearings, Low-friction sliding surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||