This 0.494" thick brass stock sheet, a premium lubricating grade material, offers exceptional wear resistance and self-lubricating properties. Ideal for demanding applications requiring reduced friction and extended component life.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.494" |
| Length | 45" |
| Width | 28" |
Trusted by engineers across multiple sectors, this lubricating grade brass stock sheet boasts a precise thickness of 0.494 inches, a substantial length of 45 inches, and a width of 28 inches. Its inherent alloying properties, specifically formulated for lubrication, provide excellent machinability and a low coefficient of friction, making it an ideal choice for bearing surfaces, wear plates, and sliding components in heavy machinery and industrial equipment. The material's corrosion resistance further enhances its longevity in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, smooth, and free of debris. 2. Position the brass stock sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners or adhesive, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of brass for lubricating applications. | Always select brass specifically designated for lubricating properties to ensure optimal performance and longevity. |
| Inadequate surface preparation of mating components. | Thoroughly clean and deburr all mating surfaces before installation to prevent premature wear and ensure proper contact. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing Surfaces, Wear Plates, Bushings and Sleeve Bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||