Engineered for critical pneumatic applications, this brass stock sheet offers exceptional machinability and corrosion resistance. Its precise dimensions ensure seamless integration into complex assemblies, guaranteeing reliable fluid control.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.487" |
| Length | 25" |
| Width | 41" |
Precision-manufactured to tight tolerances, this 0.487-inch thick brass stock sheet measures 25 inches by 41 inches. Composed of a high-copper alloy, it exhibits excellent machinability, ductility, and resistance to common pneumatic media, including air and inert gases. The material's inherent non-sparking properties are beneficial in potentially hazardous environments. Ideal for fabricating custom pneumatic valve bodies, manifolds, and pressure vessels where dimensional accuracy and material integrity are paramount for leak-free operation and component longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Accurately mark and cut to required dimensions using appropriate tooling. 3. Deburr all cut edges to prevent material fatigue and ensure proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and inaccurate edges. | Employ sharp, high-quality cutting tools specifically designed for brass, and always deburr edges after cutting. |
| Ignoring material compatibility with specific pneumatic media. | Verify that brass is suitable for the intended pneumatic medium and operating pressure/temperature to prevent corrosion or degradation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom pneumatic valve fabrication, Pneumatic manifold construction, Pressure vessel components, Pneumatic fitting bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||