This high-quality brass stock sheet is specifically formulated for lubricating applications. Its inherent properties reduce friction and wear, making it ideal for critical components in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.486" |
| Length | 44" |
| Width | 39" |
Built to exacting engineering tolerances, this 0.486" thick brass stock sheet measures 44" in length and 39" in width. Composed of a specialized brass alloy with controlled additions for enhanced self-lubricating characteristics, it exhibits excellent machinability and gall resistance. The material's microstructure is optimized to facilitate low friction operation, reducing heat generation and extending service life in sliding or rotating components. Suitable for applications requiring consistent performance under moderate loads and speeds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the brass stock to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated brass component to the intended mating part, maintaining proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy instead of a lubricating grade. | Verify the material specification confirms it is a lubricating brass alloy designed for reduced friction. |
| Inadequate surface preparation of mating components. | Thoroughly clean both the brass part and its mating surface to remove any contaminants that could impede lubrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Journal Bearings, Bushings and Sleeve Bearings, Wear Strips and Guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||