This premium carbon steel stock sheet, measuring 0.485 inches thick, 33 inches long, and 16 inches wide, is engineered for demanding pneumatic applications. Its robust construction ensures superior strength and longevity in high-pressure environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.485" |
| Length | 33" |
| Width | 16" |
Engineered for reliability and performance, this carbon steel stock sheet offers exceptional tensile strength and impact resistance, crucial for pneumatic component fabrication. The precise 0.485" thickness, combined with a 33" length and 16" width, allows for accurate machining and forming of critical pneumatic parts such as housings, manifolds, and pressure vessels. Its inherent durability ensures it can withstand the cyclic stresses and pressures common in industrial pneumatic systems, providing a stable and long-lasting foundation for your equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to fabrication. 2. Precisely cut and machine the sheet to design specifications using appropriate tooling for carbon steel. 3. Ensure all fabricated components are deburred and cleaned before assembly into pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly specified sheet material. | Always confirm that the stock sheet meets or exceeds the required thickness, length, and width specifications for the intended pneumatic component. |
| Inadequate post-machining surface treatment. | Thoroughly deburr and clean all edges and surfaces after cutting and machining to prevent particulate contamination within pneumatic circuits. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Cylinder Housings, Compressed Air Reservoirs, Manifold Blocks for Control Valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||