This 0.482-inch thick polycarbonate sheet offers exceptional clarity and superior impact resistance for critical filtering applications. Its robust material properties ensure durability and performance in demanding environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.482" |
| Length | 14" |
| Width | 28" |
Trusted by engineers across multiple sectors, this 0.482" thick polycarbonate filtering sheet, measuring 14" x 28", provides an optimal balance of optical clarity and mechanical strength. Polycarbonate's inherent toughness makes it resistant to shattering and impact, crucial for protective barriers and optical filtering components. Its broad operating temperature range and excellent chemical resistance further enhance its suitability for diverse industrial filtration systems, laboratory equipment, and machine guarding.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or mounting brackets. 3. Secure the sheet using appropriate fasteners, avoiding overtightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without washers, leading to concentrated stress points. | Utilize flat washers with fasteners to distribute load evenly across the sheet surface. |
| Drilling holes too close to the edge, compromising structural integrity. | Maintain a minimum edge distance of at least 2.5 times the hole diameter for all drilled openings. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Optical Filters, Laboratory Equipment Shields, Protective Barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||