This 0.481" thick carbon steel stock sheet, measuring 15"x15", provides robust material for a wide range of industrial fabrication and manufacturing needs. Its predictable performance and versatility make it a fundamental raw material.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.481" |
| Length | 15" |
| Width | 15" |
Trusted by engineers across multiple sectors, this 0.481" thick carbon steel stock sheet (15"x15") offers a dependable foundation for critical components. Engineered for high tensile strength and weldability, its carbon content (typically between 0.15% and 0.25%) ensures excellent machinability and formability. Ideal for structural elements, custom brackets, machinery parts, and general fabrication where durability and cost-effectiveness are paramount. This material meets industry standards for consistency and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Safely handle and position the carbon steel sheet using appropriate lifting equipment. 2. Precisely cut or form the sheet to the required dimensions using suitable fabrication tools. 3. Securely weld, bolt, or otherwise fasten the fabricated component according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material deformation or poor edge quality. | Employ high-quality, sharp cutting blades specifically designed for carbon steel to ensure clean cuts and minimize material stress. |
| Inadequate pre-treatment before welding, such as insufficient cleaning of the surface. | Thoroughly degrease and remove any mill scale or rust from the weld area to ensure proper weld penetration and strength. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Structural fabrication, Machinery components, Custom brackets and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||