This robust Nylon stock sheet, measuring 0.480" thick by 38" x 28", offers exceptional strength and durability. Ideal for demanding material handling applications, it provides reliable performance in challenging environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.480" |
| Length | 38" |
| Width | 28" |
Manufactured under strict quality controls, this 0.480" thick Nylon stock sheet boasts superior mechanical properties including high tensile strength, excellent impact resistance, and low coefficient of friction. Its precise dimensions of 38" length and 28" width ensure consistent performance in a wide range of material handling equipment, chute liners, wear pads, and protective coverings. The inherent abrasion resistance of Nylon makes it an ideal choice for applications involving repetitive contact and heavy loads, minimizing wear and extending the service life of components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely mark and drill mounting holes according to design specifications, considering potential thermal expansion. 3. Securely fasten the Nylon stock sheet using appropriate hardware, avoiding overtightening to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners. | Use washers and ensure fasteners are snug but not excessively tight to allow for slight expansion and contraction. |
| Not accounting for material expansion/contraction. | In applications with significant temperature fluctuations, design mounting systems that accommodate thermal movement. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Chute Liners, Wear Strips and Pads, Conveyor Components, Impact Plates, Protective Coverings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||