Engineered for demanding environments, this 0.473" thick Nylon stock sheet offers exceptional durability and wear resistance. Its optimized dimensions provide a versatile solution for various material handling needs.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.473" |
| Length | 32" |
| Width | 19" |
A proven choice for industrial professionals, this Nylon stock sheet boasts a substantial 0.473-inch thickness, ensuring robust performance under load. Measuring 32 inches in length and 19 inches in width, it provides ample surface area for fabrication and application. The inherent properties of Nylon, including its high tensile strength, excellent abrasion resistance, and low coefficient of friction, make it ideal for reducing wear and tear on moving parts, protecting surfaces, and facilitating smooth material flow in chutes, liners, and wear pads. This material is designed to withstand the rigors of continuous industrial use.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mounting surface thoroughly. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the sheet using mechanical fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to poor edge quality and potential material stress. | Employ sharp, industrial-grade cutting tools specifically designed for plastics, such as carbide-tipped saws or routers. |
| Over-tightening fasteners, which can cause localized stress concentrations and crack propagation. | Utilize washers to distribute fastener load and tighten bolts or screws to snug, avoiding excessive force. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Chute and liner fabrication, Impact plates and bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||