This high-strength carbon steel stock sheet, specifically sized at 0.461" x 26" x 17", is ideal for fabricating durable components within pneumatic systems. Its robust material ensures longevity under pressure.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.461" |
| Length | 26" |
| Width | 17" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a substantial 0.461" thickness, providing exceptional structural integrity for demanding pneumatic applications. Its 26" length and 17" width offer ample material for custom fabrication of critical components such as housings, mounting brackets, and support structures. The inherent strength and formability of carbon steel allow for precise machining and welding, ensuring a secure fit and long operational life in high-pressure environments. This material is selected for its cost-effectiveness and proven track record in industrial settings where durability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the carbon steel stock sheet to the required dimensions for the pneumatic component. 2. Machine or form the sheet according to design specifications, ensuring tight tolerances. 3. Weld or fasten the fabricated component securely into the pneumatic system, verifying all connections for leaks.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized sheet metal for structural components. | Always verify the required thickness and dimensions based on pressure ratings and structural load calculations. |
| Inadequate surface preparation before welding. | Thoroughly clean the carbon steel surface to remove rust, oil, and contaminants to ensure strong, defect-free welds. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Cylinder Components, Air Compressor Housings, Pneumatic Manifold Fabrication, Industrial Automation Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||