This premium brass stock sheet is engineered for demanding lubricating applications. Its specific composition and precise dimensions ensure optimal performance in friction-reducing environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.460" |
| Length | 46" |
| Width | 21" |
Manufactured under strict quality controls, this brass stock sheet boasts a thickness of 0.460 inches, a length of 46 inches, and a width of 21 inches. Its inherent lubricity and excellent bearing properties make it ideal for components requiring low friction and high wear resistance. The alloy composition is optimized for self-lubricating characteristics, minimizing the need for external lubricants in many operational scenarios, thereby reducing maintenance and operational costs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all surfaces thoroughly to remove any contaminants. 2. Ensure proper alignment with mating components to prevent binding. 3. Secure the sheet using appropriate fastening methods that do not compromise its integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-wear, low-friction applications. | Always select specific lubricating grade brass alloys engineered for these conditions. |
| Improper surface preparation leading to premature wear. | Thoroughly clean and deburr all mating surfaces before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Wear plates, Bushings, Self-lubricating components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||