This premium carbon steel stock sheet, precisely 0.452" thick, offers superior strength and durability for demanding fabrication projects. Its dimensions of 38" x 17" provide ample material for a wide range of industrial applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.452" |
| Length | 38" |
| Width | 17" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.452 inches, a width of 17 inches, and a length of 38 inches. Engineered for optimal weldability and formability, this material typically exhibits a yield strength exceeding 30,000 PSI and tensile strength above 50,000 PSI, making it suitable for applications requiring significant load-bearing capacity and impact resistance. Surface finish is consistent, ensuring excellent adhesion for coatings and paints.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any pre-existing damage or surface imperfections. 2. Ensure proper cutting and shaping equipment is calibrated and suitable for 0.452" thick carbon steel. 3. Follow established welding or joining procedures appropriate for the specific carbon steel grade.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for heavy gauge steel. | Utilize industrial-grade plasma cutters, abrasive saws, or shears specifically designed for 0.452" carbon steel to prevent tool damage and ensure clean cuts. |
| Inadequate preparation of welding surfaces. | Thoroughly clean all welding areas to remove mill scale, oil, and contaminants. Proper beveling may be required depending on the joint design. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Structural supports and framing, Industrial machine bases, Heavy-duty enclosures and housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||