This lubricating brass stock sheet, precisely manufactured to 0.452" thickness, is engineered for demanding applications requiring inherent lubricity and excellent machinability. Its uniform composition ensures consistent performance.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.452" |
| Length | 17" |
| Width | 18" |
Built to exacting engineering tolerances, this brass stock sheet features a precise thickness of 0.452 inches, a length of 17 inches, and a width of 18 inches. Composed of a specific brass alloy optimized for self-lubricating properties, it exhibits excellent wear resistance, good corrosion resistance, and superior machinability. This makes it ideal for components in sliding mechanisms, bearings, bushings, and anti-friction surfaces where reduced lubrication and extended service life are critical design parameters.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Accurately machine the brass stock sheet to the required dimensions and tolerances for the specific application. 3. Install the machined brass component, ensuring proper fit and alignment with adjacent parts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient lubrication during machining, which can lead to tool wear and poor surface finish. | Employ appropriate cutting fluids and cooling systems during all machining operations to maintain optimal temperatures and chip evacuation. |
| Over-tightening fasteners when securing the brass component, potentially causing deformation or stress concentrations. | Apply specified torque values during fastener installation to prevent damage and ensure proper load distribution. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearings and bushings, Sliding wear components, Gears and sprockets in lubricated environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||