This premium brass stock sheet is engineered for superior performance in demanding abrading and polishing operations. Its precise dimensions and high-quality brass composition ensure consistent results and durability.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.448" |
| Length | 42" |
| Width | 33" |
A high-performance industrial component, this brass stock sheet boasts a substantial 0.448" thickness, providing exceptional rigidity and wear resistance for rigorous applications. Measuring 42" in length and 33" in width, it offers ample material for fabricating custom abrading tools, polishing pads, or intricate decorative components. The inherent properties of brass, including excellent thermal and electrical conductivity, along with its malleability and corrosion resistance, make it an ideal substrate for surface finishing processes where precision and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate surface to ensure proper adhesion or integration. 2. Accurately cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten or integrate the cut brass sheet into the intended application, ensuring alignment and stability.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick brass, leading to poor edge quality. | Utilize high-speed steel or carbide-tipped cutting tools specifically rated for brass to achieve clean, precise cuts. |
| Overheating the brass during fabrication, causing changes in material properties. | Employ controlled heating techniques and adequate cooling to prevent annealing or material degradation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Abrasive Media Manufacturing, Specialty Polishing Pad Substrates, Corrosion-Resistant Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||