This robust 0.441" thick carbon steel stock sheet is engineered for demanding electrical and lighting applications. Its substantial gauge and durable material provide a reliable foundation for various components and enclosures.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.441" |
| Length | 19" |
| Width | 28" |
A proven choice for industrial professionals, this carbon steel stock sheet measures 0.441 inches in thickness, 19 inches in width, and 28 inches in length. Its high tensile strength and excellent formability make it ideal for fabricating robust enclosures, mounting brackets, and structural components within electrical and lighting systems. The material's inherent conductivity and durability ensure long-term performance and protection against environmental factors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris. 2. Precisely measure and mark cut lines according to design specifications. 3. Securely cut the sheet using appropriate industrial cutting tools.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or thin gauge material for structural support. | Always select material thickness that meets or exceeds the calculated load and stress requirements for the application. |
| Improper handling leading to bends or damage. | Utilize lifting equipment and secure handling procedures to prevent deformation during transport and installation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Mounting Brackets, Industrial Control Panel Construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||