This 0.438" thick brass stock sheet is engineered for demanding lubricating applications. Its inherent properties provide excellent wear resistance and self-lubricating capabilities in industrial settings.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.438" |
| Length | 29" |
| Width | 12" |
A proven choice for industrial professionals, this brass stock sheet offers exceptional performance characteristics. Precisely manufactured to 0.438" thickness, 29" length, and 12" width, it utilizes the inherent low friction and good machinability of brass. This material is known for its excellent corrosion resistance and ability to withstand moderate loads and temperatures, making it ideal for components requiring reduced wear and reliable operation in machinery where lubrication is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free from debris. 2. Accurately cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component in its intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or deformation. | Employ sharp, industrial-grade cutting tools designed for metal fabrication to ensure clean cuts. |
| Improper surface preparation before installation, affecting contact and lubrication. | Thoroughly clean all mating surfaces to remove any contaminants that could impede smooth operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings, Wear plates, Guide rails.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||