This 0.436" thick 304 stainless steel stock sheet is precision-manufactured for exceptional durability in lubricating systems. Its robust construction ensures longevity and consistent performance under demanding industrial conditions.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.436" |
| Length | 14" |
| Width | 13" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a substantial 0.436" thickness, ensuring rigidity and resistance to deformation in high-stress environments. Composed of 18% chromium and 8% nickel, it offers excellent corrosion resistance, particularly in wet or chemically aggressive lubricating applications, preventing premature degradation. The 14-inch length and 13-inch width provide ample material for custom fabrication of components within lubricating machinery, such as wear plates, guide rails, or specialized channel liners where friction reduction and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the receiving surface thoroughly to remove any debris or contaminants. 2. Precisely position the 304 stainless steel stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting, or adhesive bonding) as dictated by the application's load and operational requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before installation. | Ensure the mounting surface is impeccably clean and free from grease, oil, or particulate matter to guarantee proper adhesion or structural integrity. |
| Over-tightening fasteners, leading to material stress or deformation. | Utilize torque-controlled fastening or consult engineering drawings for recommended torque values to avoid localized stress concentrations in the stainless steel. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Lubricating system wear plates, Guide rails for sliding components, Custom fabrication of bearing surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||