This 0.433" thick polycarbonate stock sheet, measuring 17"x33", is engineered for demanding lubricating applications. Its inherent properties offer exceptional durability, chemical resistance, and low friction for smooth operation in harsh industrial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.433" |
| Length | 17" |
| Width | 33" |
A proven choice for industrial professionals, this 0.433" thick polycarbonate stock sheet boasts exceptional impact strength, surpassing glass and acrylic significantly. Its low coefficient of friction, enhanced by its polymer structure, makes it ideal for self-lubricating components and wear surfaces in machinery. The material's inherent chemical inertness ensures resistance to a wide range of oils, greases, and solvents commonly found in industrial settings. Measuring 17" in length and 33" in width, these sheets are readily fabricated for custom applications, providing reliable performance and extended service life under continuous operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from contaminants. 2. Position the polycarbonate sheet precisely against the mounting surface, aligning all edges and mounting holes. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent stress cracking. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using abrasive cleaners or solvents that can degrade polycarbonate. | Clean with mild soap and water, or a plastic-specific cleaner. Avoid ammonia-based products. |
| Drilling mounting holes too close to the edge, leading to stress concentration and potential cracking. | Maintain a minimum edge distance of 2-3 times the hole diameter for all drilled holes. |
| Exposing the material to continuous temperatures exceeding its service limit. | Consult the material's technical data sheet for maximum continuous operating temperature and ensure the application stays within these parameters. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction wear strips, Self-lubricating bearings and bushings, Guide rails and chute liners in material handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||