This robust Nylon Stock Sheet, engineered for suspending and bracing, offers exceptional load-bearing capacity and impact resistance. Its dense polymer structure ensures long-term performance in high-stress industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.425" |
| Length | 37" |
| Width | 25" |
Built to exacting engineering tolerances, this 0.425-inch thick Nylon Stock Sheet measures 37 inches in length and 25 inches in width. Crafted from high-grade Nylon, it exhibits superior tensile strength, excellent abrasion resistance, and a high degree of self-lubrication, minimizing wear in dynamic applications. This material's inherent dielectric properties also make it suitable for environments where electrical insulation is a requirement. Its dimensional stability under varying temperatures ensures reliable performance in diverse operational conditions, making it ideal for custom fabrication of brackets, mounts, and wear components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the nylon sheet to the required dimensions using appropriate cutting tools. 2. Drill mounting holes as per design specifications, ensuring proper clearance for fasteners. 3. Secure the fabricated component firmly using suitable industrial-grade fasteners, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without proper cooling, leading to melting and burring of the nylon. | Employ sharp, high-speed steel drill bits and utilize a cutting fluid or compressed air for cooling during drilling. |
| Over-tightening fasteners, causing stress concentrations and potential cracking of the nylon. | Use torque-limiting tools to tighten fasteners to recommended specifications, preventing material damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Brackets and Mounts, Wear Strips and Bushings, Chute Liners and Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||