This premium brass stock sheet is specifically engineered for demanding lubricating applications. Its robust construction and inherent material properties ensure superior performance and longevity in critical industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.425" |
| Length | 13" |
| Width | 47" |
Specified by design engineers worldwide, this brass stock sheet offers exceptional performance in lubricating systems. With a precise thickness of 0.425 inches, a generous length of 13 inches, and a width of 47 inches, it provides ample material for custom fabrication. The brass alloy exhibits excellent machinability, inherent lubricity, and resistance to wear and corrosion, making it ideal for bearing surfaces, wear plates, and sliding components where reduced friction and extended operational life are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Cut the brass stock sheet to the required dimensions using appropriate tooling for brass. 3. Securely fasten the cut sheet to the designated surface using specified fasteners, ensuring flush contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for brass, leading to material deformation or poor edge quality. | Utilize carbide-tipped or high-speed steel cutting tools specifically recommended for machining brass to achieve clean cuts and maintain dimensional accuracy. |
| Inadequate surface preparation before installation, resulting in uneven contact and premature wear. | Thoroughly clean and level the mounting surface to guarantee full and consistent contact with the brass sheet, preventing localized stress points. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces in heavy machinery, Wear plates in sliding mechanisms, Low-friction guides and runners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||