This high-grade brass stock sheet is engineered for superior performance in lubricating applications. Its precise dimensions and material composition ensure reliable operation and extended service life in rigorous industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.424" |
| Length | 17" |
| Width | 38" |
Designed for demanding industrial environments, this brass stock sheet features a precise thickness of 0.424 inches, a length of 17 inches, and a width of 38 inches. Composed of brass, it exhibits excellent inherent lubricity and low friction coefficients, making it ideal for applications requiring smooth, consistent movement. Its moderate hardness resists wear and galling under pressure, while its thermal conductivity aids in heat dissipation. This sheet is suitable for fabricating wear plates, slide guides, and bearing surfaces in machinery where reduced friction and enhanced durability are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Precisely cut the brass sheet to the required dimensions for the application. 3. Securely fasten the brass sheet using appropriate industrial-grade fasteners or adhesives, ensuring flush contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to reduced lubricity. | Thoroughly clean and degrease both the brass sheet and the mating surface before installation. |
| Over-tightening fasteners, causing distortion of the sheet. | Apply fasteners evenly and avoid excessive torque to maintain the sheet's flatness. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear plates in conveyor systems, Slide guides for automated machinery, Low-friction bearing surfaces, Components for pumps and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||