This 0.421" thick polycarbonate stock sheet, measuring 26" x 46", is engineered for exceptional abrasion and impact resistance. It's a versatile material for demanding industrial environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.421" |
| Length | 26" |
| Width | 46" |
Trusted by engineers across multiple sectors, this 0.421" thick polycarbonate sheet (26" length x 46" width) provides outstanding optical clarity and superior impact strength. Its inherent abrasion resistance makes it ideal for applications requiring durability against scratching and wear. This material exhibits excellent thermal stability and is easily fabricated, allowing for precise customization. Typical uses include machine guarding, protective shields, and high-wear surfaces where clarity and toughness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled mounting holes or desired placement. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid stress points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing stress cracking. | Use washers and tighten fasteners snugly, but avoid excessive force. Consider slotted holes for expansion. |
| Using incompatible cleaning agents, leading to surface damage. | Only use mild soap and water or specialized polycarbonate cleaners. Avoid ammonia-based or abrasive solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Shields, Abrasion-Resistant Panels, Glazing in High-Impact Areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||