This high-performance nylon stock sheet is engineered for demanding suspending and bracing applications. Its robust construction ensures exceptional load-bearing capacity and long-term structural integrity in industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.421" |
| Length | 29" |
| Width | 28" |
Manufactured under strict quality controls, this 0.421" thick nylon stock sheet provides superior tensile strength and impact resistance. Measuring 29" in length and 28" in width, it's ideal for custom fabrication of supports, brackets, and bracing components. Nylon's inherent properties, including excellent abrasion resistance and chemical inertness, make it a reliable choice for challenging operational conditions where durability and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon sheet to the required dimensions using appropriate cutting tools for dense polymers. 2. Drill mounting holes as per design specifications, ensuring clean edges to prevent stress concentration. 3. Secure the fabricated component using compatible fasteners, ensuring proper torque and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits not designed for plastics, leading to melting or chipping. | Utilize specialized drill bits for plastics or composite materials, operating at reduced speeds to prevent heat buildup. |
| Over-tightening fasteners, which can cause cracking or deformation of the nylon. | Employ torque-limiting tools or hand-tighten fasteners with washers to distribute pressure evenly across the nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom bracing for machinery, Support structures for piping and conduit, Wear pads and guide components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||