This heavy-duty carbon steel stock sheet offers exceptional strength and formability for critical fabricating applications. Its precise dimensions and material composition ensure reliable performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.418" |
| Length | 22" |
| Width | 37" |
Specified by design engineers worldwide, this 0.418-inch thick carbon steel stock sheet measures 22 inches by 37 inches. Manufactured to stringent industry standards, it exhibits excellent tensile strength and weldability, making it suitable for structural components, heavy machinery parts, and custom fabrication projects. The material's consistent properties ensure predictable behavior during cutting, bending, and forming operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper material handling and safety protocols are observed. 2. Accurately cut the sheet to the required dimensions using appropriate cutting tools. 3. Prepare edges for welding or joining as per fabrication design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrectly selecting material thickness for load-bearing applications. | Always verify the required thickness based on engineering calculations for intended load and stress requirements. |
| Inadequate surface preparation before welding, leading to poor bond strength. | Thoroughly clean and degrease the weld area to remove any contaminants that could compromise the weld integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy Equipment Fabrication, Structural Supports, Machine Bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||