Engineered for robust structural support, this premium brass stock sheet offers exceptional strength and corrosion resistance. Ideal for demanding suspending and bracing applications where reliability is paramount.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.417" |
| Length | 22" |
| Width | 13" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.417 inches thick, 22 inches in length, and 13 inches in width. Composed of a high-copper alloy, it exhibits excellent tensile strength, ductility, and inherent corrosion resistance, making it superior for environments prone to moisture or chemical exposure. Its dimensional stability ensures consistent performance and load-bearing capacity, crucial for critical bracing and suspension systems in industrial, marine, and architectural settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Accurately measure and mark cut lines on the brass sheet according to project requirements. 3. Utilize appropriate cutting tools (e.g., abrasive saws, waterjet cutting) for precise fabrication and deburr all edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can lead to galvanic corrosion when in contact with brass. | Always use compatible fasteners, such as brass, silicon bronze, or stainless steel, to prevent galvanic corrosion. |
| Applying excessive force during bending or forming, which can weaken the material or cause cracking. | Employ controlled bending techniques with appropriate tooling and consider the material's ductility to avoid overstressing. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Structural bracing in corrosive environments, Custom suspension hardware for marine applications, Heavy-duty mounting plates and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||