This precision-engineered brass stock sheet, measuring 0.416 inches thick, 32 inches in length, and 27 inches in width, is specifically designed for demanding lubricating applications where material integrity and controlled friction are paramount.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.416" |
| Length | 32" |
| Width | 27" |
Precision-manufactured to tight tolerances, this brass stock sheet offers exceptional dimensional stability and surface finish critical for low-friction environments. The inherent self-lubricating properties of brass, combined with its moderate strength and corrosion resistance, make it an ideal material for components requiring smooth operation and extended service life. Its specific alloy composition ensures consistent performance under moderate loads and operating temperatures, preventing galling and reducing wear in sliding mechanisms. This sheet is optimized for applications demanding reliable lubrication and controlled friction coefficients.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both mating surfaces thoroughly to remove any debris or contaminants. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, ensuring even pressure distribution to maintain flatness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Always ensure all mating surfaces are meticulously cleaned and free of any abrasive particles before installation. |
| Over-tightening fasteners, causing sheet distortion. | Apply fasteners incrementally and evenly to avoid localized stress concentrations and maintain the sheet's flatness. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces in low-speed, high-load machinery, Wear pads and guide strips for sliding mechanisms, Components in agricultural and construction equipment requiring self-lubrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||