This high-performance brass stock sheet is engineered for demanding lubricating applications. Its intrinsic properties provide excellent wear resistance and low friction, ensuring extended component life and operational efficiency.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.415" |
| Length | 39" |
| Width | 29" |
Built to exacting engineering tolerances, this brass stock sheet boasts a precise thickness of 0.415 inches, a substantial length of 39 inches, and a width of 29 inches. Crafted from high-quality brass alloy, it exhibits superior machinability and a naturally low coefficient of friction, making it ideal for bearings, bushings, and sliding components where lubrication is critical. Its excellent thermal conductivity also aids in heat dissipation within moving parts, preventing premature failure under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Precisely cut or machine the brass stock to the required component dimensions. 3. Securely fasten the component, ensuring proper alignment and contact with the mating surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy for high-wear lubricating applications. | Select a brass alloy specifically formulated for lubricating properties, such as those with added lead for enhanced self-lubrication. |
| Insufficient surface preparation of mating parts. | Thoroughly clean and deburr all mating surfaces to prevent premature wear and ensure smooth operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Journal bearings, Bushings and sleeve bearings, Wear plates and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||