This robust 0.414-inch thick carbon steel stock sheet is engineered for high-performance pneumatic systems. Its substantial dimensions and material strength ensure reliability in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.414" |
| Length | 32" |
| Width | 37" |
Built to exacting engineering tolerances, this 0.414" thick carbon steel stock sheet offers superior structural integrity and dimensional accuracy for critical pneumatic component fabrication. Composed of high-carbon steel, it exhibits excellent tensile strength, hardness, and wear resistance, making it ideal for housing, mounting brackets, and structural elements within pneumatic machinery. Its precise dimensions of 32" in length and 37" in width allow for efficient material utilization and seamless integration into complex assemblies, ensuring optimal performance and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Precisely cut the carbon steel sheet to required component shapes using appropriate fabrication tools (e.g., laser, plasma, or waterjet cutting). 3. Perform any necessary edge finishing, drilling, or forming operations according to the design blueprint.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel instead of specified carbon steel for critical load-bearing pneumatic components. | Always confirm the material grade meets the required tensile strength and hardness for the intended pneumatic application. |
| Inadequate edge preparation after cutting, leading to stress concentrations or poor weldability. | Ensure all cut edges are deburred, chamfered, or prepared according to welding or assembly requirements to prevent premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Cylinder Housings, Mounting Brackets for Pneumatic Valves, Structural Components for Air Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||