This premium brass stock sheet is engineered for demanding lubricating applications. Its dense microstructure and inherent low friction properties make it ideal for bearings, bushings, and sliding components requiring reduced wear.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.413" |
| Length | 14" |
| Width | 33" |
Precision-manufactured to tight tolerances, this 0.413" thick brass stock sheet measures 14" in width and 33" in length. Composed of a high-quality brass alloy, it exhibits excellent machinability, corrosion resistance, and a naturally low coefficient of friction, crucial for self-lubricating or externally lubricated mechanisms. This material is chosen for its ability to withstand moderate loads and operating temperatures while minimizing wear and heat generation in dynamic systems. Its consistent density and uniform grain structure ensure predictable performance and longevity in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the stock sheet using appropriate fasteners or adhesive, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lubrication methods for brass. | Consult material datasheets for recommended lubricants that are compatible with brass to prevent corrosion or increased friction. |
| Over-tightening fasteners, causing deformation. | Apply fasteners incrementally and in a cross pattern, referring to torque specifications if provided, to avoid warping the sheet. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Wear plates, Bushings and sleeves, Guide rails, Sliding components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||