A robust 304 Stainless Steel stock sheet engineered for precision in measurement and inspection tasks. Its substantial thickness and dimensions ensure stability and durability for critical industrial applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.410" |
| Length | 20" |
| Width | 35" |
A high-performance industrial component, this 304 Stainless Steel stock sheet is manufactured to exacting standards for superior dimensional stability and corrosion resistance. Measuring precisely 0.410 inches in thickness, 20 inches in length, and 35 inches in width, it provides a reliable and flat surface essential for accurate gauging, layout, and quality control processes. The 304 stainless steel alloy offers excellent resistance to a wide range of corrosive media, making it suitable for use in chemical, food processing, and marine environments where hygiene and longevity are paramount. Its inherent strength and wear resistance further contribute to its utility as a foundational element in industrial metrology and fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free of debris. 2. Carefully position the 304 Stainless Steel stock sheet onto the prepared surface, aligning with designated markers or guides. 3. Secure the sheet using appropriate fastening methods (e.g., clamps, screws into pre-drilled holes, or adhesive) to prevent movement and maintain flatness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper handling leading to surface scratches or cosmetic damage. | Always handle with clean, lint-free gloves and use non-abrasive tools for manipulation and positioning. |
| Incorrectly assuming standard imperial measurements for metric applications. | Verify all imperial measurements (inches) against required metric dimensions before integration into any system. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Precision layout and marking surfaces, Inspection fixtures and jigs, Work surfaces for fine assembly and measurement.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||