This 0.408-inch thick 304 stainless steel stock sheet offers exceptional corrosion resistance and formability. Measuring 21 inches by 42 inches, it is engineered for reliable performance in demanding fabricating projects.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.408" |
| Length | 21" |
| Width | 42" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet boasts a nominal thickness of 0.408 inches, a length of 21 inches, and a width of 42 inches. Composed of a minimum of 18% chromium and 8% nickel, it exhibits superior resistance to a broad spectrum of corrosive environments, including atmospheric, food, and industrial applications. Its excellent weldability and formability make it suitable for intricate designs and structural components. The annealed condition ensures optimal ductility for bending, cutting, and shaping without compromising material integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free from contaminants. 2. Carefully measure and mark cut lines using appropriate scribing tools. 3. Utilize industrial-grade cutting equipment (e.g., plasma cutter, waterjet) to achieve desired dimensions. 4. Deburr all cut edges to remove sharp protrusions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to burrs and compromised edge quality. | Employ high-quality industrial cutting equipment designed for metal fabrication to ensure clean cuts and minimal burr formation. |
| Neglecting proper cleaning procedures, resulting in surface contamination and potential corrosion points. | Thoroughly clean the sheet before and after cutting/forming operations using appropriate degreasers and non-abrasive cleaning agents. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom machine guarding, Industrial shelving and supports, Specialty hoppers and chutes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||