This 0.407-inch thick carbon steel stock sheet, measuring 17" x 30", provides exceptional strength and durability for critical pneumatic system components. Engineered for rigorous industrial use, it offers a reliable foundation for manufacturing robust and long-lasting parts.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.407" |
| Length | 17" |
| Width | 30" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a substantial thickness of 0.407 inches, a length of 17 inches, and a width of 30 inches. Its high tensile strength and formability make it ideal for fabricating robust housings, mounting brackets, and structural elements within pneumatic machinery. The material's inherent toughness resists deformation under pressure and impact, ensuring operational integrity in high-cycle and demanding environments. This sheet's precise dimensions facilitate accurate machining and assembly, minimizing waste and ensuring consistent component quality for your pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface of the sheet thoroughly to remove any contaminants. 2. Precisely mark and cut the sheet according to design specifications using appropriate cutting tools. 3. Smooth all edges and deburr any sharp points to ensure safe handling and proper fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for high-pressure pneumatic applications. | Ensure the carbon steel selected meets the specific tensile strength and yield strength requirements for the intended pneumatic pressure and operational loads. |
| Inadequate edge preparation after cutting. | Thoroughly deburr and smooth all cut edges to prevent material fatigue initiation and ensure safe assembly and operation of pneumatic components. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder end caps, Mounting plates for pneumatic actuators, Structural support frames for pneumatic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||