Engineered for uncompromising safety and durability, this 0.403" thick polycarbonate sheet offers superior impact resistance for demanding industrial environments. Its robust construction ensures reliable protection where it matters most.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.403" |
| Length | 22" |
| Width | 31" |
Purpose-built for heavy-duty applications, this 0.403" thick polycarbonate sheet measures 22 inches in width and 31 inches in length. Renowned for its exceptional impact strength, exceeding that of glass and acrylic, it provides robust protection against projectiles and physical force. Its inherent UV resistance ensures long-term clarity and performance in outdoor environments. The material's high tensile strength and dimensional stability make it ideal for machine guarding, riot shields, and protective barriers where reliability under extreme stress is paramount. Compliance with relevant safety standards is inherent to its design and material selection.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or intended mounting points. 3. Secure the sheet using appropriate fasteners, ensuring not to over-tighten, which could cause stress cracking. Use rubber washers for added protection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without washers, leading to stress concentration and potential cracking. | Always employ rubber or neoprene washers when fastening polycarbonate sheets to distribute pressure evenly and prevent damage. |
| Drilling holes too close to the edge of the sheet, compromising structural integrity. | Maintain a minimum edge distance of 1.5 to 2 times the hole diameter for all drilled holes. |
| Exposing the sheet to incompatible chemicals that can cause crazing or degradation. | Consult a chemical resistance chart for polycarbonate before exposing the sheet to solvents or aggressive cleaning agents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Industrial Safety Shields, Protective Barriers, Riot Shields, Glazing for Hazardous Areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||