This robust 0.402" thick Nylon stock sheet is engineered for superior durability and performance in high-stress industrial applications. Its exceptional strength and wear resistance make it a reliable choice for custom fabricated parts.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.402" |
| Length | 28" |
| Width | 32" |
Designed for demanding industrial environments, this 0.402" thick Nylon stock sheet offers exceptional tensile strength, abrasion resistance, and low coefficient of friction. Measuring 28" x 32", it provides a substantial surface area for fabrication. Its inherent toughness makes it suitable for applications requiring resistance to impact, chemicals, and extreme temperatures. Ideal for manufacturing components such as gears, bearings, bushings, wear pads, and structural supports in machinery, material handling systems, and heavy equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark precise cut lines on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with carbide-tipped blade) for clean, accurate cuts. 3. Fasten or integrate the cut Nylon component into the final assembly using recommended mechanical fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ specialized cutting tools with appropriate tooth geometry and cooling methods for Nylon to ensure clean edges. |
| Over-tightening fasteners, which can cause stress cracking or deformation in the Nylon. | Use washers to distribute load and tighten fasteners to the manufacturer's recommended torque specifications for Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Plates and Bushings, Gears and Sprockets, Structural Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||