Engineered for demanding environments, this 0.402-inch thick 304 stainless steel sheet offers superior corrosion resistance and durability for critical lubricating applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.402" |
| Length | 40" |
| Width | 42" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet features a substantial 0.402" thickness, ensuring exceptional structural integrity and wear resistance under extreme loads and pressures. The 304 alloy provides excellent corrosion resistance against a wide range of lubricants and process chemicals, preventing degradation and maintaining performance over its service life. Its precise dimensions of 40" in length and 42" in width facilitate integration into complex machinery and fabricated components within lubricating systems, fluid handling, and chemical processing where material inertness and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Position the sheet accurately according to design specifications. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting) as dictated by the application's load requirements and operating environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before installation. | Thoroughly clean all mating surfaces to remove any oils, grease, or particulate matter that could compromise the seal or integrity of the assembly. |
| Using incorrect fastening methods for the application's stress demands. | Select fasteners and securing techniques (welding, bolting, etc.) that are specifically rated for the anticipated operational stresses and environmental conditions to prevent premature failure. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Lubricant containment and flow channels, Wear plates and guides in high-friction machinery, Corrosion-resistant components in chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||