This 0.400-inch thick Aluminum 6061 stock sheet, measuring 30 inches in length and 27 inches in width, is engineered for demanding safety applications. Its superior strength-to-weight ratio and excellent corrosion resistance make it ideal for structural components and protective barriers.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.400" |
| Length | 30" |
| Width | 27" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers a nominal thickness of 0.400 inches, a length of 30 inches, and a width of 27 inches. Composed primarily of Aluminum alloy 6061, it exhibits a tensile strength typically exceeding 45 ksi and yield strength over 40 ksi, with excellent formability and weldability due to its T6 temper. This material's inherent corrosion resistance and machinability make it a preferred choice for critical structural components in aerospace, automotive, and industrial safety equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the designated installation area is clean, dry, and free of debris. 2. Accurately measure and mark cut lines on the Aluminum 6061 sheet according to design specifications. 3. Fabricate the sheet using appropriate cutting, drilling, and joining methods, adhering to industry best practices for aluminum alloys.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to edge deformation. | Utilize carbide-tipped saw blades or waterjet/laser cutting for clean, precise edges. |
| Inadequate consideration of thermal expansion in joining applications. | Account for aluminum's thermal expansion by incorporating expansion joints or using appropriate fastening techniques. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Protective guard fabrication, Structural framing for safety enclosures, Machine guarding components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||