This robust 0.400-inch thick carbon steel stock sheet is engineered for the rigorous demands of pneumatic systems. Its substantial dimensions and material strength ensure reliable performance in high-pressure and high-impact environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.400" |
| Length | 19" |
| Width | 48" |
Purpose-built for heavy-duty applications, this carbon steel stock sheet boasts a 0.400-inch thickness, providing exceptional structural integrity and resistance to deformation under significant mechanical stress. Measuring 19 inches by 48 inches, it offers ample surface area for fabrication and integration into complex pneumatic assemblies. The inherent toughness and weldability of carbon steel make it ideal for creating robust enclosures, mounting brackets, and structural components within pneumatic machinery and infrastructure. Its material properties ensure long-term operational reliability and safety in demanding industrial settings, resisting wear and impact effectively.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project requirements. 2. Carefully cut and shape the carbon steel sheet using appropriate fabrication tools (e.g., plasma cutter, shear). 3. Prepare edges for welding or fastening, ensuring clean surfaces for optimal joint strength.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient thickness for the intended load or pressure. | Always consult engineering load calculations and pneumatic system pressure ratings to ensure the chosen sheet thickness is adequate. |
| Inadequate edge preparation before welding, leading to weak joints. | Ensure edges are free from rust, mill scale, and contaminants, and properly beveled if required by the welding procedure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic actuator mounting plates, Heavy-duty pneumatic cylinder housings, Industrial air compressor enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||