This 0.396-inch thick Nylon stock sheet offers superior strength, wear resistance, and low friction, making it an ideal raw material for custom fabricated components in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.396" |
| Length | 20" |
| Width | 43" |
A proven choice for industrial professionals, this Nylon stock sheet boasts a precise thickness of 0.396 inches, with dimensions of 20 inches in width and 43 inches in length. Engineered from high-performance Nylon, it exhibits exceptional tensile strength, excellent abrasion resistance, and a low coefficient of friction, making it suitable for applications such as wear pads, bushings, gears, and structural components. Its inherent toughness and impact resistance ensure longevity under rigorous operational conditions. This material is readily machinable, allowing for the creation of highly precise custom parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and free of debris. 2. Accurately measure and mark the desired dimensions on the Nylon stock sheet. 3. Utilize appropriate cutting tools (e.g., saw blades designed for plastics) with proper feed rates to avoid excessive heat buildup and material deformation. 4. Smooth any rough edges with a deburring tool or fine-grit sandpaper.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating the material during cutting, leading to melting or warping. | Use sharp cutting tools and a moderate feed rate, employing coolant if necessary, to manage heat generation. |
| Attempting to drill or machine without proper clamping, causing movement and inaccurate cuts. | Securely clamp the Nylon stock sheet to the work surface to prevent slippage during machining operations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Protective Covers and Shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||